The following procedure explains how to Start/Stop An Iterative DNS Server. Procedure - Start/Stop An Iterative DNS Server
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Start or Stop from the dropdown menu below the IP list depending on what you want to do.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Flush An Iterative DNS Server
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Flush from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Remove An Iterative DNS Server From an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Remove from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Restart An Iterative DNS Server From an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Restart from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Install An Iterative DNS Server on an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the IP Addresses Without DNS Services section.
6. Click the checkbox next to the IP you want to update.
7. Select restart from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Source: http://www.interworx.com/support/docs/iworx-cp/sysadmin/system-services/dns/howto-iterative-server
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Start or Stop from the dropdown menu below the IP list depending on what you want to do.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Flush An Iterative DNS Server
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Flush from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Remove An Iterative DNS Server From an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Remove from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Restart An Iterative DNS Server From an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the Active DNS Services (Iterative) section.
6. Click the checkbox next to the IP you want to update.
7. Select Restart from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Procedure - Install An Iterative DNS Server on an IP Address
1. Click on the System Services menu if it is not already expanded.
2. Click on the DNS Server submenu if it is not already expanded.
3. Click on the Overview item.
4. You should now be looking at the DNS Management controls in the main content area.
5. Locate the IP Addresses Without DNS Services section.
6. Click the checkbox next to the IP you want to update.
7. Select restart from the dropdown menu below the IP list.
8. The page will reload and You will see the following message at the top of the screen: » Settings updated successfully.
Source: http://www.interworx.com/support/docs/iworx-cp/sysadmin/system-services/dns/howto-iterative-server
No comments:
Post a Comment